Frame Sliders

Instructions

Congratulations on purchasing the world’s finest frame sliders.  The frame sliders are to be mounted to your upper/rear engine mounts.  Refer to your service manual before performing this installation.  Remove the rearmost engine mount bolt from the right side of the motorcycle.  Replace with the shorter slider & the longer bolt supplied in this package.  Loosen the pinch bolt on the left side (14mm) rearmost mount, then remove the engine mount bolt (8mm allen) and replace with slider & the supplied bolt (shorter one). Torque to factory specifications.  Then carefully re-tighten the pinch bolt to factory specifications.   Only replace one side at a time.

Part No. FS-11

Phone:  (760-598-2105

Web:  http://www.IntuRace.com