Shopping Cart Shopping Cart - 0 item(s)
 Racing Clutches & Clutch Components
 Clutch Friction Plates
 Brake Pads
 Sprockets
 Accessories
 Instruction Manuals for Clutch & Accessories
 1/5 Scale RC Clutch
 Frame Slider Instructions
 Sliders
 





Instagram

Home > Frame Slider Instructions > EFS-14 Instructions
 

EFS-14 Instructions

Frame Sliders

Instructions

 

 

Congratulations on purchasing the world’s finest frame sliders.  The frame sliders are to be mounted to your engine mounts and do require cutting circles in your fairings (both sides).  It is suggested that you drill a small pilot hole to locate the engine mount.  Once you have found the center, use a hole saw and cut a hole approximately 2” in diameter.  It is HIGHLY recommended that you follow your service manual for detailed instructions on removing and installing your engine mounts.  Loosen the pinch bolt on the right side engine mount(5mm allen), place the longer bolt in the shorter slider and install.  Tighten to factory specifications.  Remove the left side engine mount bolt, and install the Frame Slider using the supplied bolt, then torque to factory specifications. 

 

Part No. FS-14

Phone:  (760-598-2105

Web:  http://www.IntuRace.com