Frame Slider (clutch protector)

Instructions

Congratulations on purchasing the world’s finest frame sliders.  The clutch protector is to be mounted to your swing arm pivot shaft.  Remove the stock nut and replace with the aluminum nut supplied in this kit.  Anti-seize compound is highly recommended on the nut.  Torque the nut to factory specifications.  The plastic piece is designed to fit into your frame, slide the plastic piece over the nut (make sure the aluminum bushing is inside the plastic piece and correctly positioned), then, using a non permanent thread lock, insert and tighten the 10 mm bolt supplied in this kit.

Part No. FS-4c

Phone:  (760-598-2105

Web:  http://www.IntuRace.com